| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
ULINK User's Guide
Introduction Hardware Description 
Setting Up and Using ULINK 
Connecting ULINK Installing Drivers Configuring µVision Debug Driver Configuration ULINK USB-JTAG Adapter JTAG Device Chain Debug Flash Download Configuration Download Function RAM for Algorithm Programming Algorithm Supplied Algorithms Analog Devices AMD Atmel Intel Luminary Micro Macronix NXP (founded by Philips) OKI SST STMicroelectronics Toshiba TI Adding New Algorithms Downloading to Flash Debugging Programs Chaining Multiple Targets Evaluation BoardsJTAG Device Chain
The JTAG Device Chain section displays the target board (or boards) connected to the JTAG interface cable. ULINK automatically displays the IDCODE, Device Name and IR Length of all JTAG-compatible targets it detects.
Manual Configuration allows you identify and name undetected JTAG devices. You must specify the instruction register length (IR len) of each device in the JTAG device chain.
NOTE
- If you are manually configuring an ARM device, the Device Name must be ARM7 or ARM9 to identify the core.
See Target Chaining for more information regarding multiple target configuration.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
