Nohau LPC3000

The Nohau LPC3000 Evaluation Board works with the ULINK USB-JTAG Adapter. The following instructions show you how to connect and run an example program on this board.

To download and run an example project using ULINK with the Nohau LPC3000 Board:

1. Connect the 20-pin ribbon connector from the ULINK Adapter to the JTAG connector on the Nohau LPC3000 evaluation board.
2. Connect the power adapter to the board.
3. Start µVision.
4. Select the BLINKY.UV2 example project from C:\KEIL\ARM\BOARDS\NOHAU\LPC3000\BLINKY\.
5. Click the Download button to download the program to the target board.
6. Click the Debug button to start the debugger.
7. Click the Run button to start the program running on the target board.