 OCDS User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
OCDS User's Guide
Overview
LPT Port Wiggler ULINK USB Interface Configuring µVision Connector Pinout Debugging Flash ProgrammingConnector Pinout
The Infineon OCDS connector provides a standard interface for debugging tools and programming utilities. It is typically implemented using a 16-pin IDC connector with 0.1 inch (2.54mm) spacing. The connector pin-out is illustrated at the right.
| Pin | Description |
|---|---|
| TMS | Test mode select input (according to the IEEE 1149.1 Standard) |
| TDO | Test data output (according to the IEEE 1149.1 Standard) |
| CPUCLK | CPU clock (according IEEE Standard 1149.1) |
| TDI | Test data input (according IEEE Standard 1149.1) |
| TRST | Test reset input (according IEEE Standard 1149.1) |
| TCK | Test clock input (according IEEE Standard 1149.1) |
| BRKIN | Hardware break in (Infineon-specific) |
| TRAP | Trap condition (Infineon-specific) |
| VCC | Positive Supply Voltage |
| GND | Digital Ground |
| RESET | Chip reset (Infineon specific) |
| BRKOUT | Hardware break out (Infineon-specific) |
| OCDS | Enable/Disable OCDS interface (Infineon-specific) |
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
