 MCBXC800 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCBXC800 User's Guide
Introduction MCBXC866 MCBXC88x Writing Programs Example Programs Using Infineon XC800 Flash Download Using Infineon XC800 Target Driver
Debugging Flash Programming Connecting to OCDS OCDS Connector Pinout XC800 Interface Connector Chaining multiple JTAG devices Configuring ULINK Target Driver Setup Target Debug Options Flash Download Options Troubleshooting Configuring DAS DAS Driver Setup Infineon DAvEConfiguring ULINK
To select ULINK as the µVision Debugger interface:
- Open the Project — Options for Target dialog.
- Select the Debug tab.
- Click the Use button
- Select the Infineon XC800 ULINK Driver from the drop-down.
- Check the Load Application at Startup and the Go till main() options.
- Click on Settings to open the Target Driver Setup dialog.
To select ULINK as the Flash Programming Tool:
- Select the Utilities tab.
- Click the Use Target Driver for Flash Programming button.
- Select the Infineon XC800 ULINK Driver from the drop-down.
- Click on Settings to open the Target Driver Setup dialog.
Note
Enable the Update Target before Debugging to automatically download the program to the Flash ROM when the debugger starts.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
