 MCBXC800 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCBXC800 User's Guide
Introduction MCBXC866 MCBXC88x Writing Programs
Keil PK51 Professional Developer's Kit Application Notes Creating Application Programs Creating a Project Setting Target Options Configuring Output Files Building a Program Programming Flash Downloading with ULINK Infineon XC800 Flash Download Utility Debugging Programs Debugging with ULINK Example Programs Using Infineon XC800 Flash Download Using Infineon XC800 Target Driver Infineon DAvEInfineon XC800 Flash Download Utility
Download using the Infineon XC800 Flash Utility. The steps to setup the XC800 for programming Flash are:
- Configure Flash Programming.
Use the toolbar button and click the Utilities tab to display the Utilities dialog.- Enable Use External Tool for Flash Programming. The µVision Device Database™ sets the required configuration options for the Infineon XC800 Flash Download Utility.
Note
- Make sure the program path in the Command text box corresponds to where you installed the Infineon XC800 Flash Download Utility.
- Enable Use External Tool for Flash Programming. The µVision Device Database™ sets the required configuration options for the Infineon XC800 Flash Download Utility.
- Connect and Configure
Connect and configure the MCBXC866 Board as described in Configuring XC800 Download Utility.
- Download to Flash
Click the Download to Flash button or use the µVision command Flash — Download to download the application program into the XC800 device.
| Contact Site Map Press Privacy | Copyright © 2009 Keil™, An ARM® Company. All rights reserved. |
