 MCBXC800 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCBXC800 User's Guide
Introduction MCBXC866 MCBXC88x Writing Programs Example Programs Using Infineon XC800 Flash Download Using Infineon XC800 Target Driver
Debugging Flash Programming Connecting to OCDS OCDS Connector Pinout XC800 Interface Connector Chaining multiple JTAG devices Configuring ULINK Target Driver Setup Target Debug Options Flash Download Options Troubleshooting Configuring DAS DAS Driver Setup Infineon DAvEConfiguring DAS
To select the Debug Access Server (DAS) driver:
- Open the Project — Options for Target dialog.
- Select the Debug tab.
- Click the Use button
- Select the Infineon DAS Client for XC800 from the drop-down.
- Check the Load Application at Startup and the Run to main() options.
- Click on Settings to open the Target Driver Setup dialog.
To select the Infineon DAS interface as the Flash Programming Tool:
- Open the Project — Options for Target dialog.
- Select the Utilities tab.
- Click the Use Target Driver for Flash Programming button
- Select the Infineon DAS Client for XC800 from the drop-down.
- Check the Update Target before Debugging option.
- Click on Settings to open the Target Driver Setup dialog.
Enable the Update Target before Debugging to download the program to the Flash ROM when the debugger starts up.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
