 MCBXC800 User's Guide | |
| Home Products Events Support | |
On-Line Manuals
MCBXC800 User's Guide
Introduction MCBXC866 MCBXC88x Setup
MCBXC88x Board Setup MCBXC88x Board Components Connecting the MCBXC88x Configuring the MCBXC88x MCBXC88x Jumper Descriptions MCBXC88x Connectors Install USB Device Driver Configure the COM Port Theory of Operation Block Diagram PCB Illustration Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration OCDS (JTAG) Interface LEDs Push Button Potentiometer CAN Interface USB Interface Writing Programs Example Programs Using Infineon XC800 Flash Download Using Infineon XC800 Target Driver Infineon DAvEConfiguration
The MCBXC88x evaluation board is very flexible and configures easily to suit your needs. Configuration jumpers and 0 Ohm resistors control the built-in features such as debug interfaces, CAN driver, and Analog Input Voltages.
Refer to the Configuring the MCBXC88x and the MCBXC88x Connectors for descriptions of the possible settings.
After changing configuration jumpers, you must reset the MCBXC88x board.
Note
- The Infineon XC800 device series provides many configuration options. Some of these settings are available using configuration resistors which are illustrated in the MCBXC88x Schematics topic.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
