 MCBXC800 User's Guide | |
| Home Products Events Support | |
On-Line Manuals
MCBXC800 User's Guide
Introduction MCBXC866 MCBXC88x Setup
MCBXC88x Board Setup MCBXC88x Board Components Connecting the MCBXC88x Configuring the MCBXC88x MCBXC88x Jumper Descriptions MCBXC88x Connectors Install USB Device Driver Configure the COM Port Theory of Operation Block Diagram PCB Illustration Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration OCDS (JTAG) Interface LEDs Push Button Potentiometer CAN Interface USB Interface Writing Programs Example Programs Using Infineon XC800 Flash Download Using Infineon XC800 Target Driver Infineon DAvESetup
Setting up the MCBXC88x evaluation board is easy. Explanations for the board setup and its components are presented here. Details about the connecting and configuring procedures for the MCBXC88x board are also presented here. Setup includes installing the USB Device Driver and configuring the COM Port number.
The MCBXC88x board requires a power connection and either a serial connection for In-System Programming, or a ULINK-USB adapter between your development PC and the JTAG connector.
Before you start, make sure you have satisfied the hardware and software requirements.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
