Configuring the MCBXC167

The MCBXC167 Evaluation Board is configured using DIP switches, jumpers and resistors. The MCBXC167 Board ships with the following configuration:

• Default DIP switch settings
• Default OFF Bootstrap Loader (for debugging via OCDS/ULINK).
• 3 Chip Select Lines (CSSEL)
• 4 Segment Address Lines (SALSEL)
• 20 MHz internal CPU clock (CLKCFG)
• 1 MByte of External Flash ROM.
• Enabled CAN drivers and CAN bus termination resistors.
• Enabled 5V reference for the A/D converter.