Keil Logo

Pre-Configured Startup Files

The pre-configured startup files are available on the MCBXC167 board. You may copy these files to your own MCBXC167 projects that require similar configurations. You may also copy from the example project folder BOARDS\KEIL MCBXC167\BLINKY_OCDS.

Startup File Description
BOARDS\KEIL MCB-XC167\BLINKY_OCDS\START_V2.A66 Configures the BUS System for external Flash ROM and RAM. The program code is stored in Flash. This file is the best choice for projects that do not use the Ethernet Controller.
BOARDS\KEIL MCB-XC167\BLINKY_OCDS
\START_V2_RAM.A66
Configures the BUS System for external Flash ROM and RAM. However, the RAM is mapped to address 0 so the program code can be stored in RAM. Use this file for debugging program code in RAM.
BOARDS\KEIL MCB-XC167\EasyWEB\START_V2.A66 Configures the Bus System for external Flash ROM, RAM, and the Ethernet Controller. The program code is stored in Flash.

Note

  • You may use the startup files listed above even when program code resides in on-chip Flash ROM.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.