MCBXC167 User's GuideIntroduction Setup Theory of Operation Writing Programs Example Programs MON166 BLINKY Building BLINKY Downloading BLINKY Debugging BLINKY Checking Serial Output OCDS BLINKY Building BLINKY Downloading BLINKY Debugging BLINKY Checking Serial Output EASYWEB Set DIP Switches for EASYWEB Building EASYWEB Downloading EASYWEB Debugging EASYWEB Checking Output PLL_DEMO Set DIP Switches for PLL_DEMO Building PLL_DEMO Downloading PLL_DEMO Debugging PLL_DEMO Checking Output TwinCAN Building TwinCAN Downloading TwinCAN Debugging TwinCAN Checking Output Infineon Memtool Utility Startup Code
The BLINKY example project, configured for OCDS Debugging, toggles the LEDs on Port 2 and sends the text "Hello World" to the serial interface COM1.
The BLINKY example project demonstrates assembling, compiling, linking, downloading, and debugging using the µVision IDE on the MCBXC167 board. The on-board LEDs make it easy to visually verify that the program loads and executes properly. The HyperTerm terminal emulator program makes it easy to verify serial output.
To load the BLINKY project, select Open Project from the Project menu and open BLINKY.UV2 from the following folder:
When the BLINKY project opens, the µVision Project Workspace window displays the source files that make up the project.
The ABSTRACT.TXT file contains documentation about the project.
You may edit Blinky.c or review the source code. Double click on Blinky.c in the Files page of the Project Window. µVision loads and displays the contents of in an editor window.
Perform the following four steps to run the BLINKY Example on the MCBXC167 Evaluation Board:
of your data.