 MCBXC167 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCBXC167 User's Guide
Introduction Setup Theory of Operation Writing Programs Example Programs MON166 BLINKY
Building BLINKY Downloading BLINKY Debugging BLINKY Checking Serial Output OCDS BLINKY Building BLINKY Downloading BLINKY Debugging BLINKY Checking Serial Output EASYWEB Set DIP Switches for EASYWEB Building EASYWEB Downloading EASYWEB Debugging EASYWEB Checking Output PLL_DEMO Set DIP Switches for PLL_DEMO Building PLL_DEMO Downloading PLL_DEMO Debugging PLL_DEMO Checking Output TwinCAN Building TwinCAN Downloading TwinCAN Debugging TwinCAN Checking Output Infineon Memtool Utility Startup CodeBuilding EASYWEB
Build the EASYWEB example program following this procedure. Set the target to On-Chip Flash: XC16x Board. The executable files are placed in an output folder, ready for downloading.
When you are ready to compile and link your project, use the Build Target command from the Project menu or the Build toolbar. On the Build toolbar, select the appropriate target for your program.
µVision translates and links the source files and creates an absolute object module that you may load into the µVision debugger for testing. The status of the build process displays in the Build page of the Output Window.
This example output is from the target On-chip Flash: MCBXC167.
Note
- The sample projects provided with µVision compile and link without errors.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
