| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBx51 User's Guide
Introduction 
Kit Contents Hardware Requirements Software Requirements Quick Start 
Setup Theory of Operation 251 Devices 8051 DevicesHardware Requirements
To use the MCBx51 Evaluation Kit, you need:
- The MCBx51 Evaluation Board.
- A IBM-compatible PC with an available RS-232 port.
If the port has a 25-pin connector, a 9-pin male to 25-pin female adapter may be required. - A serial cable, 9-pin male to 9-pin female, wired one-to-one.
- A 8-12 volt, DC power supply with a 5.5mm barrel plug, and a 2.5mm center hole providing positive voltage.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
