|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
MCBTMS570 User's Guide
Introduction
Setup
Theory of Operation
Block Diagram
Schematics
Technical Data
Prototyping Area
Microcontroller
Power Supply
Configuration
JTAG Interface
ETM Interface
LCD Panel w/Touch Screen
LEDs
Push Buttons
Temperature Sensor
Light Sensor
Speaker
CAN Interface
LIN/RS485 Interface
FlexRay Interface
USB Interface
Ethernet Interface
MicroSD Connector
External EEPROM and F-RAM
Writing Programs
Example Programs
MCBTMS570 User's Guide
Power Supply
Power is supplied to the MCBTMS570 board set by connecting the 12VDC power adapter included in your kit to the coaxial connector on the MCBTMS570 MCU board.
You may also power the board from a bench supply using the 12VDC connections on the board.
A series of DC-to-DC converters (IC18, IC19, IC9, IC10 and IC11) generate 3.3 VDC, 5vdc, 1.2VDC, 1.8VDC and 1.5VDC, respectively, to the board.
The green 12V LED on the IO board indicates that 12 VDC is present.
The 3 blue LEDs on the MCU board indicate that 1.5VDC, 3.3VDC and 5VDC is present on this board.
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Buy |
|
 |
|||
