|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
MCBTMPM395 User's Guide
Introduction
Setup
Theory of Operation
Block Diagram
Schematics
Technical Data
Prototyping
Microcontroller
Power Supply
JTAG Interface
ETM Interface
LEDs
Push Buttons
Potentiometer
USB Interface
MicroSD Connector
Consumer Electronics Control (CEC)
Remote Control Signal Preprocessor
Writing Programs
Example Programs
MCBTMPM395 User's Guide
Technical Data
| Parameter | Description |
|---|---|
| Supply Voltage | 5 Volts DC (provided by the USB bus of a PC),
or or 1.7 - 3.6 Volts DC from an external power adapter. |
| Supply Current | 10mA typical, 15mA maximum |
| XTAL Frequency | 20 MHz |
| Microcontroller | Toshiba TMPM395FWAXBG |
| Peripherals | 1 × Cortex Serial Wire JTAG Interface, 1 × Cortex + ETM Interface, 1 × Remote Control Signal Preprocessor Interface, 1 × Consumer Electronics Control (CEC) Interface, 1 × USB Device Interface, 1 × MicroSD Card Interface, 6 × Push buttons (Reset, NMI, 4 user-configurable), 1 × Analog Input (connected to potentiometer) |
| Board Size | 137mm x 69mm (5.375" x 2.6875"). |
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
|
 |
|||
