Keil Logo

Downloading to Flash

Download using the Keil ULINK JTAG-Adapter. The steps to setup ULINK for Programming Flash within µVision IDE are:

  1. Connect the ULINK to the JTAG connector of the MCBTMPM360 Board. Note that the red tracer on the cable marks pin 1 of the JTAG-connector.

    MCBTMPM360 connected to ULINK2

  2. Power up the MCBTMPM360 Board.
  3. Configure Flash Programming in the Project — Options for Target — Utilities dialog.

    Use Target Driver Option Set the Use Target Driver for Flash Programming option, then select the ULINK Cortex Debugger as the Flash programming tool.



    Update Target Option Check the Update Target before Debugging option to ensure that the Flash ROM gets programmed whenever the debugger starts.

    Settings Button Click the Settings button to open the Flash Download Setup dialog for the next step.

  4. Configure the Flash Download Setup dialog as follows:

    Flash Download FunctionSet the Download Function options by first selecting Erase Sectors used by the application, then check Program and Verify to verify the Flash contains the downloaded application.



    RAM for Algorithm SettingSet the Start location for for the flash programming algorithm to 0x2000000 in RAM and set the Size to 0x0800.



    Programming AlgorithmClick the Add button and find the TMPM36xFx 1024kB Flash programming algorithm in the list of available algorithms. Select it, then click the Add button to add it to your target.

    Finally, click the OK button to save the Target Driver settings, then click the OK button to save the Options for Target dialog settings.

  5. Download to Flash

    Download To Flash ButtonClick the Download to Flash toolbar button. This executes the Flash download program (Target Driver or External) selected in Project — Options for Target — Utilities and downloads the application program into the TMPM360F20FG device.

    Or

    Use the µVision command Flash — Download to download the application program into the TMPM360F20FG device.

ULINK can be also used for application code debugging in Flash ROM or RAM of the TMPM360F20FG microcontroller.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.