| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBTMPM330 User's Guide
Introduction Setup Theory of Operation Writing Programs 
Example Programs BLINKY 
Building BLINKY Downloading BLINKY Debugging BLINKY Checking Program OutputChecking Program Output
To check the program output from the BLINKY program, start the program running either from the debugger via JTAG or by cycling power on the board. The LEDs will flash in sequence. Changing the potentiometer setting increases or decreases the speed of the LED flashing sequence.
Pressing the PH1 button on the MCBTMPM330 board pauses the LED flashing sequence.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
