 MCBSTR9 User's Guide | |
| Home Products Events Support | |
On-Line Manuals
MCBSTR9 User's Guide
Introduction Setup Theory of Operation
Block Diagram Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface LCD Panel LEDs Push Buttons Potentiometer Serial Ports CAN Interface USB Interface Ethernet Interface SD Connector Writing Programs Example Programs STR91x Software Library Interrupt FunctionsConfiguration
The MCBSTR9 evaluation board is very flexible and configures easily to suit your needs. Configuration jumpers control the built-in features such as debug interfaces, CAN driver, and Analog Input Voltages.
Refer to Configuring the MCBSTR9 and Jumper Descriptions for descriptions of the possible settings.
After changing configuration jumpers, you must reset the MCBSTR9 board.
Note
- The MCBSTR91xx device provides many configuration options. Some of these settings are available using configuration resistors which are illustrated in the Schematics topic.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
