| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBSTR9 User's Guide
Introduction Setup Theory of Operation 
Writing Programs 
Keil MDK-ARM Application Notes Creating Application Programs Creating a Project Setting Target Options Configuring Output Files Building a Program Programming Flash Downloading to Flash Debugging Programs Debugging with ULINK Example Programs STR91x Software Library Interrupt FunctionsProgramming Flash
The MCBSTR9 board supports downloading programs to Flash memory using the ULINK USB-JTAG adapter through the JTAG connector.
The ULINK USB-JTAG interface also supports emulation and debug capabilities for the MCBSTR9 board.
Programming the STR91x Extended Flash Capabilities
By default, the ULINK USB-JTAG adapter downloads Flash to the MCBSTR9 board using the In-System Programming (ISP) interface. This works well for program debugging and testing when setting security bits is not required. But for production, you may want to enable the OTP, User Code, Configuration Bytes, and Chip Security features of the STR91x device. When you enable these special features, you must use the ICP interface to download Flash.
To take advantage of this special feature, the MDK-ARM Development Toolkit provides separate Flash algorithms for downloading via the ICP interface. The ICP at the end of the algorithm title identifies the algorithms that download using the ICP interface.
The BLINKY example program contains targets that demonstrate using the ISP and ICP algorithms. The STR910 Flash target does not require the advanced security settings and uses the ISP algorithm for downloading. The STR910 Flash with CFG target enables the security bits in the STR91xCFG.s file and therefore must download using the ICP algorithm.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
