 MCBSTR9 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCBSTR9 User's Guide
Introduction Setup Theory of Operation Writing Programs Example Programs BLINKY
Building BLINKY Downloading BLINKY Debugging BLINKY Checking Program Output STR91x Software Library Interrupt FunctionsDebugging BLINKY
Debug the BLINKY example program following this procedure. The debugged program is ready for the serial output check.
Use the Start/Stop Debug Session toolbar button or the µVision command Debug - Start/Stop Debug Session to connect the debugger to the Keil ULINK Adapter. The CPU stops and connects to the Embedded ICE of the STR91x device. For more details on the debugging features, refer to the µVision User's Guide.
The Peripherals menu allows you to open different dialogs for Peripheral units on the STR91x devices. You may view and/or change the state and configuration of on-chip Peripherals using these dialogs.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
