| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBSTR7 User's Guide
Introduction Setup 
Theory of Operation 
Block Diagram Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface LEDs Push Buttons Potentiometer Serial Ports CAN Interface USB Interface Writing Programs Example Programs STR71x Firmware Library Interrupt FunctionsLEDs
The LEDs on the MCBSTR7 board are:
- The 5V OK and 3.3V OK LEDs indicate that power is present on the board.
- The CPU Standby LED displays when the STR7xF is in Standby Mode.
- P2.8 - P2.15 are connected to eight Port 2 pins. You may use these LEDs to display program status while testing your applications.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
