 MCBSTR7 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCBSTR7 User's Guide
Introduction
Kit Contents Features Hardware Requirements Software Requirements Quick Start Setup Theory of Operation Writing Programs Example Programs STR71x Firmware Library Interrupt FunctionsFeatures
The connectors on the MCBSTR7 evaluation board provide easy access to many of the STR71xF's on-chip peripherals.
- Dual Serial Ports
Standard DB9 connectors are on the MCBSTR7 board for both STR71xF's built-in UART interfaces. Your application may use either or both of these full duplex, serial ports. - CAN Port
A standard DB9 connector is on the MCBSTR7 board for applications with CAN communications. - USB Port
A standard USB connector is on the MCBSTR7 board for applications with USB communications. - Analog Voltage Control for ADC Input
An adjustable analog voltage source is on the MCBSTR7 board for testing the Analog to Digital output feature of the STR71xF. A configuration jumper enables and disables this feature. - JTAG Download and Debug
A JTAG interface is on the MCBSTR7 board and, coupled with the ULINK USB-JTAG adapter, allows flash programming. The on-chip debug interface can perform real-time in-circuit emulation of the STR71xF device. For fast PC communication, use your PC's USB port.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
