|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
MCBSTM32F200/400 User's Guide
Introduction
Setup
Board Setup
Board Components
Connecting the MCBSTM32F200
Setting the JTAG Clock
Configuring the MCBSTM32F200
Jumper Descriptions
Theory of Operation
Writing Programs
Example Programs
Connecting the MCBSTM32F200
To use the MCBSTM32F200 Evaluation Board with ULINK, you must:
- Connect the ULINK adapter to the JTAG or the Cortex Debug connector of the MCBSTM32F200 board.
- Connect the ULINK adapter to the PC via a standard USB AB cable.
- Connect power from your PC to the board using the included USB A to Micro B cable.
- Set the JTAG clock for your ULINK adapter.
The following picture shows how to connect ULINK to the MCBSTM32F200 board.
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Contact |
|
 |
|||
