MCBSTM32F200/400 User's Guide
The MCBSTM32F200 User's Guide describes the MCBSTM32F200
Evaluation Board and contains detailed operating instructions for the
an overview of the MCBSTM32F200 Board, the features, hardware and
software requirements, where to find information quickly, and where
to find Technical Support.
Setup shows the
MCBSTM32F200 Board components, how to connect, configure, and use
the board, and describes the jumpers.
Operation explains the components of the MCBSTM32F200 board
Programs describes how to write programs, download to
flash, and configure your project for debugging for the
lists the example programs available on the installation CD and on
the Keil website. There are step-by-step instructions on building
and running the BLINKY example programs.
The statements made in this manual are valid for both boards,
the MCBSTM32F200 and MCBSTM32F400, unless a differentiation is made
explicitly. Both use the same base board and on-chip peripherals.
Only the MCUs differ.
- August 2011: Initial revision.
- August 2013: Correct J6 jumper description.
- June 2014: Updated for MDK V5.
March 2015: Added V1.2 base board schematics documenting the
replacement of the end-of-life ST802RT1 external Ethernet PHY
with a Micrel KSZ8081RNA.