| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBSTM32E User's Guide
Introduction Setup 
Theory of Operation 
Block Diagram Schematics Technical Data Prototyping Area Microcontroller External Memory Power Supply Configuration JTAG Interface ETM Interface LCD Panel LEDs Push Buttons Joystick Potentiometer Speaker Serial Port CAN Interface USB Interface MicroSD Connector Writing Programs Example ProgramsConfiguration
The MCBSTM32E evaluation board is very flexible and configures easily to suit your needs. Configuration jumpers control the built-in features such as debug interfaces, CAN driver, and Analog Input Voltages.
Refer to Configuring the MCBSTM32E and Jumper Descriptions for descriptions of the possible settings.
After changing configuration jumpers, you must reset the MCBSTM32E board.
Note
- The STM32F103FE device provides many configuration options. Some of these settings are available using configuration resistors which are illustrated in the Schematics topic.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
