| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBSTM32C User's Guide
Introduction Setup 
Theory of Operation 
Block Diagram Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface ETM Interface LCD Panel w/Touch Screen LEDs Push Buttons Joystick Potentiometer Speaker/Headphone Microphone Serial Port CAN Interface USB Interface Ethernet Interface MicroSD Connector Accelerometer External EEPROM Writing Programs Example ProgramsTechnical Data
| Parameter | Description |
|---|---|
| Supply Voltage | 5 Volts DC (provided by the USB bus of a PC), or VIN: 5.0–5,5 Volts DC from an external power supply. Use 5.5 Volts when the board is used as USB host or USB OTG. |
| Supply Current | 180mA typical, 200mA maximum |
| XTAL Frequency | 25 MHz |
| Microcontroller | STMicroelectronics STM32F107VC |
| Peripherals | 1 × RS232 Interface, 2 × CAN Interfaces, 1 × USB Interface, 1 × Ethernet Interface, 1 × Color graphic display (240x320), 1 × MicroSD Memory Card connector, 1 × JTAG Interface, 1 × Cortex/ETM Interface, 4 × Push buttons (Reset, Wake Up, Tampering, User), 1 × Joystick (5-position), 1 × Analog Input (connected to potentiometer), 1 × Low power, Stereo CODEC (with headphone, speaker, and microphone support) |
| Board Size | 120mm x 120mm (4.75" x 4.75"). |
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
