| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBSTM32C User's Guide
Introduction Setup 
Theory of Operation 
Block Diagram Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface ETM Interface LCD Panel w/Touch Screen LEDs Push Buttons Joystick Potentiometer Speaker/Headphone Microphone Serial Port CAN Interface USB Interface Ethernet Interface MicroSD Connector Accelerometer External EEPROM Writing Programs Example ProgramsJTAG Interface
The JTAG Interface connector provides debugging and emulator support for the STM32F107VC device. The JTAG Interface allows application debugging and programming of on-chip and off-chip Flash devices.
The standard JTAG 20-pin connector works with the Keil ULINK and many third party tool vendors. The Cortex Debug connector works with the Keil ULINK2 adapter.
Serial Wire Mode Interface
The MCBSTM32C board also supports the Serial Wire Mode of Cortex-M3 based devices. In Serial Wire mode, only the pins TCLK and TMS are used. TDO is an optional trace data output pin.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
