| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBSTM32C User's Guide
Introduction Setup 
Theory of Operation 
Block Diagram Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface ETM Interface LCD Panel w/Touch Screen LEDs Push Buttons Joystick Potentiometer Speaker/Headphone Microphone Serial Port CAN Interface USB Interface Ethernet Interface MicroSD Connector Accelerometer External EEPROM Writing Programs Example ProgramsConfiguration
The MCBSTM32C evaluation board is very flexible and configures easily to suit your needs. Configuration jumpers control the built-in features such as debug interfaces, CAN driver, and Analog Input Voltages.
Refer to Configuring the MCBSTM32C and Jumper Descriptions for descriptions of the possible settings.
After changing configuration jumpers, you must reset the MCBSTM32C board.
Note
- The STM32F107VC device provides many configuration options. Some of these settings are available using configuration resistors which are illustrated in the Schematics topic.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
