Keil Logo

Configuring the MCBSTM32C

The MCBSTM32C Evaluation Board is configured using 3 sets of jumpers. The MCBSTM32C Board ships with the following configuration:

Power Jumper

Jumper State Description
VDD J4
ON1 Provides 3.3VDC to the VDD pins of the STM32F107VC device.

Boot Config Jumpers

BOOT1 BOOT0 Mode Description
---- GND1 User Flash Maps User Flash to boot space.
GND BOOT0 System Memory Maps System Memory to boot space.
BOOT1 GND n/a
BOOT1 BOOT0 Embedded SRAM Maps on-chip SRAM to boot space.

Audio Jumpers

Jumper State Description
J1 ON1 Connects selected microphone bias level to the AIN3B microphone input.
J3 ON1 Connects selected microphone bias level to the AIN3A microphone input
J5 ON1 Selects the speaker for audio output.

1 Factory setting of MCBSTM32C: User Flash Boot Mode; user code execution from on-chip Flash ROM, and USB is not detected.

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.