| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBSTM32C User's Guide
Introduction Setup Theory of Operation Writing Programs 
Example Programs BLINKY 
Building BLINKY Downloading BLINKY 
Debugging BLINKY Checking Program OutputDebugging BLINKY
Debug the BLINKY example program following this procedure. The debugged program is ready for the serial output check.
Use the Start/Stop Debug Session toolbar button or the µVision command Debug — Start/Stop Debug Session to connect the debugger to the Keil ULINK Adapter. The CPU stops and connects to the CoreSight debug port of the STM32F107VC device. For more details on the debugging features, refer to the µVision User's Guide.
The Peripherals menu allows you to open different dialogs for Peripheral units on the STM32F107VC devices. You may view and/or change the state and configuration of on-chip Peripherals using these dialogs.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
