| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCBSTM32 User's Guide
Introduction 
Kit Contents Features Hardware Requirements Software Requirements Quick Start MCBSTM32 Starter Kit 
Setup Theory of Operation Writing Programs Example ProgramsFeatures
The connectors on the MCBSTM32 evaluation board provide easy access to many of the STM32F103's on-chip peripherals.
- Serial Port
A standard DB9 connector is on the MCBSTM32 board for the STM32F103's built-in UART interfaces. Your application may use this full duplex, serial port, if required. - CAN Port
A standard DB9 connector is on the MCBSTM32 board for applications with CAN communications. - USB Port
A standard USB connector is on the MCBSTM32 board for applications with USB communications. - Analog Voltage Control for ADC Input
An adjustable analog voltage source is on the MCBSTM32 board for testing the Analog to Digital output feature of the STM32F103. - SD Card Connector
An SD Card connector for developing applications requiring access to SD Cards. - JTAG Download and Debug
A JTAG interface is on the MCBSTM32 board and, coupled with the ULINK USB-JTAG adapter, allows flash programming. The on-chip debug interface can perform real-time in-circuit emulation of the STM32F103 device. For fast PC communication, use your PC's USB port.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
