 MCBSTM32 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCBSTM32 User's Guide
Introduction Setup Theory of Operation Writing Programs Example Programs
Using STM32_Init.c BLINKY Building BLINKY Downloading BLINKY Debugging BLINKY Checking Program Output STM32F10x Software LibraryBuilding BLINKY
Build the BLINKY example program following this procedure. The executable files are placed in an output folder, ready for downloading.
When you are ready to compile and link your project, use the Build Target command from the Project menu or the Build toolbar. On the Build toolbar, select the appropriate target for your program.
µVision translates and links the source files and creates an absolute object module that you may load into the µVision debugger for testing. The status of the build process displays in the Build page of the Output Window.
Once the BLINKY application is built, if you selected the STM32 Flash target, proceed with the Downloading step. If the STM32 RAM target is selected, go directly to the Debugging step.
Note
- You should not encounter any errors when you use µVision with the provided sample projects.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
