| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB950 User's Guide
Introduction Setup Theory of Operation Writing Programs Example Programs 
Using ULINK Target Driver 
Debugging Flash Programming Connecting to JTAG Configuring ULINK Target Driver Setup Target Debug Options Flash Download Options TroubleshootingConnecting to JTAG
The NXP On-Chip Instrumentation (OCI) connector provides a standard interface for debugging tools and programming utilities.
The OCI Connector Pinout (ULINK2/ARM JTAG) describes the individual pins on the 20-pin IDC connector used as the NXP On-Chip Instrumentation connector.
The FS2 OCI Connector (FS2 JTAG) describes the individual pins on the 10-pin IDC connector that work with the LPC 95x.
Note
- When using either the ULINK2 USB-JTAG adapter or the FS2 USB adapter, make sure the RUN jumper is ON, and the RESET jumper is OFF.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
