| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB950 User's Guide
Introduction Setup Theory of Operation Writing Programs Example Programs 
Using ULINK Target Driver 
Debugging Flash Programming Connecting to JTAG Configuring ULINK Target Driver Setup Target Debug Options Flash Download Options TroubleshootingUsing ULINK Target Driver
The NXP LPC95x ULINK Driver provides the software interface for the Keil ULINK USB-JTAG Adapter to the NXP On-Chip Instrumentation (OCI), which is available on the NXP 95x device series.
The NXP LPC95x ULINK Driver interfaces with the µVision IDE/Debugger and offers:
- A broad range of debugging features using standard production chips.
- High-speed interface for Flash Programming.
ULINK USB Interface
The Keil ULINK USB-OCI Adapter connects your PC USB port to the LPC95x OCI connector pins. Your hardware must have an OCI connector to use ULINK.
As an alternative, you may use the FS2 System Navigator to access OCI compatible hardware.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
