 MCB950 User's Guide | |
| Home Products Events Support | |
On-Line Manuals
MCB950 User's Guide
Introduction Setup Theory of Operation
Block Diagram PCB Illustration Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface LEDs Potentiometer Serial Ports USB Interface Writing Programs Example Programs Using ULINK Target DriverTechnical Data
| Parameter | Specification |
|---|---|
| Supply Voltage | 5V DC (provided by the USB bus of a PC) |
| Supply Current | 100mA max |
| XTAL Frequency | 7.373 MHz Internal RC. External user-provided (optional). |
| Memory | On-chip RAM/Flash ROM only. |
| Microcontroller | NXP P89LPC952 (or compatible device). |
| Peripherals | 1 × USB-to-COM Interface (UART0), 1 × classic RS232 Interface (UART1), 1 × Potentiometer (for Analog Input), 8 × Port 5 LEDs. |
| Prototyping Area | 55mm x 18mm (2.1" x 0.7") wrap area. All CPU pins available on separate pins. |
| Board Size | 59mm x 110mm (2.3" x 4.3"). |
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
