 MCB900 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCB900 User's Guide
Introduction Setup Theory of Operation Writing Programs
LPC Development Studio Application Notes Creating Application Programs Creating a Project Setting Target Options Configure Output Files Building a Program Programming Flash Downloading with Flash Magic Downloading with EPM900 Emulator Debugging Programs Debugging with ISD51 Running the IDS51 Example Serial I/O with ISD51 Example ProgramsSetting Target Options
You must select the speed and memory configurations for your target hardware. Since these features of the MCB900 are fixed, copy the settings as shown below.
The steps for setting the target options are:
- Open the Target Tab of the Project — Options for Target dialog.
Type in the XTAL (MHz) of 12.0 for the oscillator frequency. - Check the box for Use On-chip ROM.
- Check the box for Use On-chip XRAM.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
