| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB900 User's Guide
Introduction 
Setup 
Board Setup Board Components Connecting the MCB900 Configuring the MCB900 Jumper Descriptions Theory of Operation Writing Programs Example ProgramsConnecting the MCB900
To use the MCB900 Evaluation Board, you must:
- Connect the external serial port jack (COM1) to a COM port on your PC using a standard serial cable.
- Connect power to the board using a 5V-9VDC power supply.
The serial cable allows your PC to download program code so you can test and debug your target applications.
The power cable provides power to the MCB900 Evaluation Board. The MCB900 does not get power from the PC via the serial cable.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
