Keil Logo

Connecting the MCB54110

The MCB54000 board may be downloaded and debugged using the on-board CMSIS-DAP controller, or using a ULINK adapter.

Connecting with CMSIS-DAP

To use the MCB54110 Evaluation Board with CMSIS-DAP, you need only connect the included USB microB cable from your PC to the USB LINK power connector on the board.

MCB54110 Board Connected to CMSIS-DAP

MCB54110 Board Connected to USB LINK

Connecting with a ULINK Adapter

To use the MCB54110 Evaluation Board with a ULINK adapter, you must:

  • Connect the ULINK adapter to the target board...
    For ULINK2 and ULINK-ME:
    • Connect a ULINK2 or ULINK-ME adapter to the JTAG or Cortex Debug connector of the MCB54110 board.
    For ULINKpro:
    • Connect a ULINKpro adapter to the JTAG or the Cortex Debug connector of the MCB54110 board.
  • Connect the ULINK adapter to the PC via a standard USB AB cable.
  • To power the MCB45110 board, connect a USB A to microB cable from your PC to the boards USB connector.
    • Note: The USB LINK connector cannot be used to power the board when debugging with ULINK or any external debug adapter.
    .
  • Set the JTAG clock for your ULINK adapter.

MCB54110 Board Connected to the ULINK2 JTAG Adapter

ULINK2 Connected to the JTAG Connector of the MCB54110 Board

MCB54110 Board Connected to the ULINK-ME Adapter

ULINK-ME Connected to the Cortex Debug Connector of the MCB54110 Board

MCB54110 Board Connected to the ULINKpro JTAG Adapter

ULINKpro Connected to the Cortex Debug connector of the MCB54110 Board

  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.