Keil Logo Arm Logo

Features

The MCB2929 OEM board contains an NXP (formerly Philips) LPC2929 microcontroller with 768KB on-chip Flash and 56KB on-chip RAM. In addition, the MCB2929 OEM board contains the following components:

  • External RAM
    1MB with 16-bit BUS configuration, alternatively 512KB with 8-bit BUS configuration.
  • Color LCD
    A 320x240 TFT LCD color VGA display module is accessible via 16-bit RGB interface.
  • Serial Port
    A standard DB9 connector is on the MCB2929 board for the LPC2929's built-in UART interfaces. Your application may use this full duplex, serial port, if required.
  • CAN/LIN Ports
    2 DB9 connectors for either CAN or LIN communications.
  • USB Ports
    Standard USB connectors for USB Device, USB-OTG, USB Host and UART via USB on the MCB2929 board for applications requiring USB communications.
  • Joystick
    5-position
  • Pushbuttons
    2 plus Reset
  • Analog Voltage Control for ADC Input
    An adjustable analog voltage source is on the MCB2929 board for testing the Analog to Digital output feature of the LPC2929.
  • SD/MMC Card Connector
    An SD/MMC Card connector for developing applications requiring access to SD/MMC Cards.
  • JTAG Download and Debug
    A JTAG interface is on the MCB2929 board and, coupled with the ULINK USB-JTAG adapter, allows flash programming. The on-chip debug interface can perform real-time in-circuit emulation of the LPC2929 device. For fast PC communication, use your PC's USB port.

Keil logo

Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings