| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB2900 User's Guide
Introduction 
Kit Contents Features Hardware Requirements Software Requirements Quick Start 
Setup Theory of Operation Writing Programs Example ProgramsFeatures
The connectors on the MCB2900 evaluation board provide easy access to many of the on-chip peripherals.
- Serial Port
A standard DB9 connector is available on the MCB2900 for the LPC2900's serial port. You application may use this port, if required. - Dual CAN Ports
Standard DB9 connectors are on the MCB2900 board for applications requiring CAN communications. Your application may use either or both of these ports, or they may be disabled with a configuration jumper. - Analog Voltage Control for ADC Input
An adjustable analog voltage source is on the MCB2900 board for testing the Analog to Digital output feature of the LPC2900. A configuration jumper enables and disables this feature. - JTAG Download and Debug
A JTAG interface is on the MCB2900 board and, coupled with the ULINK USB-JTAG adapter, allows flash programming. The on-chip debug interface can perform real-time in-circuit emulation of the LPC2900 device. - External RAM
1MB with 16-bit BUS configuration, alternatively 512KB with 8-bit BUS configuration.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
