| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB2470 User's Guide
Introduction Setup 
Theory of Operation 
Block Diagram Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface ETM Interface LEDs Serial Ports CAN Interface Ethernet Interface SD/MMC Connector USB Interface Push Buttons Potentiometers Speaker QVGA Module Accelerometer IrDA Writing Programs Example ProgramsConfiguration
The MCB2470 evaluation board is very flexible and configures easily to suit your needs. Configuration jumpers control the built-in features such as debug interfaces and Analog Input Voltages.
Refer to Configuring the MCB2470 and Jumper Descriptions for a description of the possible settings.
After changing configuration jumpers, you must reset the MCB2470 board.
Note
- The LPC24xx device provides many configuration options. Some of these settings are available via configuration resistors which are illustrated in the schematics topic.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
