|
|||
| Products Download Events Support Videos | |||
Technical Support
On-Line Manuals
MCB2470 User's Guide
Introduction
Setup
Theory of Operation
Block Diagram
Schematics
Technical Data
Prototyping Area
Microcontroller
Power Supply
Configuration
JTAG Interface
ETM Interface
LEDs
Serial Ports
CAN Interface
Ethernet Interface
SD/MMC Connector
USB Interface
Push Buttons
Potentiometers
Speaker
QVGA Module
Accelerometer
IrDA
Writing Programs
Example Programs
MCB2470 User's Guide
Push Buttons
The push buttons on the MCB2470 board are:
- The RESET push button connects to the reset circuit. This resets the microcontroller.
- The P2.10/EINT0 push button connects to the external interrupt 0 (EINT0) of the microcontroller.
- Push buttons 1 through 4 (SW2 - SW5) are available for general use via I2C.
ProductsDevelopment Tools |
Hardware & Collateral |
Downloads |
Support |
Buy |
|
 |
|||
