 MCB2400 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCB2400 User's Guide
Introduction Setup Theory of Operation
Block Diagram Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface LEDs Serial Ports CAN Interface Ethernet Interface SD/MMC Connector USB Interface Push Buttons Potentiometers Speaker QVGA Module Writing Programs Example ProgramsConfiguration
The MCB2400 evaluation board is very flexible and configures easily to suit your needs. Configuration jumpers control the built-in features such as debug interfaces and Analog Input Voltages.
Refer to Configuring the MCB2400 and Jumper Descriptions for a description of the possible settings.
After changing configuration jumpers, you must reset the MCB2400 board.
Note
- The LPC24xx device provides many configuration options. Some of these settings are available via configuration resistors which are illustrated in the schematics topic.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
