 MCB2400 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCB2400 User's Guide
Introduction Setup Theory of Operation Writing Programs
RealView MDK-ARM Application Notes Creating Application Programs Creating a Project Setting Target Options Configuring Output Files Building a Program Programming Flash ULINK USB-JTAG Adapter Downloading with Flash Magic Stand Alone Utility External Tool in µVision Debugging Programs Debugging with ULINK Example ProgramsDownloading with Flash Magic
The Flash Magic utility connects the PC's COM port to the serial port UART #0 of the MCB2400 and provides In-System Flash Programming (ISP) support for Intel HEX files. The installation program for this utility may be downloaded from the Flash Magic Web Site.
Note
- The MCB2400 Board contains a USB-to-Serial bridge chip (FT232R from FTDI) that connects UART #0 on the LPC2468 to a virtual COM port on the PC (via USB). An USB driver must be installed on your PC in order for the USB-to-UART chip (FT232R) to function. Make sure to download the latest version of the driver, which can be found at FTDI Driver site (search for a FT232R driver for your operating system).
Flash Magic may be run as a stand-alone utility or as an external tool from within µVision IDE.
To configure the MCB2400 Evaluation Board for Flash programming see Configuring the MCB2400.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
