 MCB2300 User's Guide | |
| Home Products Events Support | |
On-Line Manuals
MCB2300 User's Guide
Introduction Setup Theory of Operation
Block Diagram Schematics Technical Data Prototyping Area Microcontroller Power Supply Configuration JTAG Interface LCD Panel LEDs Push Buttons Potentiometer Speaker Serial Ports CAN Interface USB Interface Ethernet Interface SD Connector Writing Programs Example ProgramsTechnical Data
| Parameter | Description |
|---|---|
| Supply Voltage | 5V DC (provided by the USB bus of a PC) |
| Supply Current | 65mA typical, 120mA maximum |
| XTAL Frequency | 12 MHz |
| Microcontroller | NXP LPC2368/LPC2378/LPC2387/LPC2388 |
| Peripherals | 2 × RS232 Interfaces, 2 × CAN Interfaces, 1 × Ethernet Interface, 1 × JTAG Interface, 1 × LCD Display, 1 × USB Interface, 1 × Analog Output (connected to speaker by default) 1 × Analog Input (connected to potentiometer by default) 1 × ETM Interface (optional) |
| Board Size | Vers.3 and older - 100mm x 160mm (3.95" x 6.3"). Vers.4 - 120mm x 140mm (4.75" x 5.5"). |
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
