Keil Logo

Features

The connectors on the MCB2140 evaluation board provide easy access to many of the on-chip peripherals.

  • USB 2.0 Full Speed Interface
    A USB interface connector on the MCB2140 board interfaces with the on-chip USB peripheral of the LPC2148 device. You may configure the board as a self-powered or a USB powered device.
  • Dual Serial Ports
    Standard DB9 connectors are on the MCB2140 for both of the LPC2148's serial ports. Your application may use either of these ports.
  • LF Amplifier
    An LF Amplifier on the MCB2140 connects the D/A output of the LPC2148 device to a speaker. You may use this LF Amplifier to generate sound.
  • Analog Voltage Control for ADC Input
    An adjustable analog voltage source is on the MCB2140 board for testing the Analog to Digital output feature of the LPC2148. A configuration jumper enables and disables this feature.
  • JTAG Download and Debug
    A JTAG interface is on the MCB2140 board and, coupled with the ULINK USB-JTAG adapter, allows flash programming. The on-chip debug interface can perform real-time in-circuit emulation of the LPC2148 device. For fast PC communication, use your PC's USB port.
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.