| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB2130 User's Guide
Introduction 
Setup 
Board Setup Board Components Connecting with ULINK Connecting with Serial ISP Verifying the COM Connection Configuring the MCB2130 Jumper Descriptions Theory of Operation Writing Programs Example ProgramsVerifying the COM Connection
After setting up the MCB2130 Board, use Flash Magic to verify the COM connection.
- Start Flash Magic (using Start — Programs — Flash Magic) and configure the COM Port interface as illustrated.
- Verify the COM connection using the menu command ISP — Read Device Signature....
- The Read Device Signature... displays the following window. Then close the Window.
If there are any errors, recheck your PC COM port designation and the jumper settings:
- J1 & J10 — ON
- J8 & J9 — OFF
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
