| ||||
| Home Products Download Events Support | ||||
Technical Support
On-Line Manuals
MCB2130 User's Guide
Introduction 
Kit Contents Features Hardware Requirements Software Requirements Quick Start 
Setup Theory of Operation Writing Programs Example ProgramsFeatures
The connectors on the MCB2130 evaluation board provide easy access to many of the on-chip peripherals.
- Dual Serial Ports
Standard DB9 connectors are on the MCB2130 board for both of the LPC2138's serial ports. Your application may use either or both of these ports. - LF Amplifier
An LF Amplifier is on the MCB2130 board to connect the D/A output of the LPC2138 device to a speaker. You may use this LF Amplifier to generate sound. - Analog Voltage Control for ADC Input
An adjustable analog voltage source is on the MCB2130 board for testing the Analog to Digital output feature of the LPC2138. A configuration jumper enables and disables this feature. - JTAG Download and Debug
A JTAG interface is on the MCB2130 board and, coupled with the ULINK USB-JTAG adapter, allows flash programming. The on-chip debug interface can perform real-time in-circuit emulation of the LPC2138 device. For fast PC communication, use your PC's USB port.
| Contact Site Map Press Privacy | Copyright © 2012 ARM Ltd and ARM Germany GmbH. All rights reserved. |
