 MCB2100 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCB2100 User's Guide
Introduction Setup Theory of Operation Writing Programs Example Programs BLINKY
Building BLINKY Downloading BLINKY Debugging BLINKY Checking Serial Output BLINKYCAN Building BLINKYCAN Downloading BLINKYCAN Debugging BLINKYCAN Checking Serial Output BLINKY IRQ Debug I/ODebug I/O
Test 1
The DebugIO Test 1 example project is a simple program for the LPC2114 using Keil MCB2100 Microcontroller Board.
It demonstrates how to use the Debug I/O Console (connected to Serial Window #1).
The DebugIO program is available in different targets:
- Simulator: runs in software Simulator
- MCB2100 RAM: runs from Internal RAM located on chip (used for target debugging)
- MCB2100 Flash: runs from Internal Flash located on chip (used for final aplication version)
Test 2
The DebugIO Test 2 example project is a simple program for the LPC2114 using Keil MCB2100 Microcontroller Board.
It demonstrates how to use the Debug I/O Console (connected to Serial Window #1).
The DebugIO program is available in different targets:
- Simulator: runs in software Simulator
- MCB2100 RAM: runs from Internal RAM located on chip (used for target debugging)
- MCB2100 Flash: runs from Internal Flash located on chip (used for final aplication version)
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
