 MCB2100 User's Guide | |
| Home Products Events Support | |
Technical Support
On-Line Manuals
MCB2100 User's Guide
Introduction Setup Theory of Operation Writing Programs Example Programs BLINKY
Building BLINKY Downloading BLINKY Debugging BLINKY Checking Serial Output BLINKYCAN Building BLINKYCAN Downloading BLINKYCAN Debugging BLINKYCAN Checking Serial Output BLINKY IRQ Debug I/ODownloading BLINKYCAN
When the BLINKYCAN build is complete, you may download the application to the MCB2140 using either:
- The Keil ULINK USB-JTAG Adapter, or
- The Flash Magic utility.
Note
- To debug this example, you must use the Keil ULINK USB-JTAG Adapter.
The BLINKYCAN application starts executing when you press RESET on the MCB2100 board to verify the program downloaded.
Note
- You may enable the option Update Target before Debugging to download the BLINKYCAN project whenever you start a Debug Session.
The downloaded program is ready for debugging.
| Contact Site Map Press Privacy | Copyright © 2008 Keil™, An ARM® Company. All rights reserved. |
